Maintenance
Cleaning the Printer
Read and adhere to the following information when cleaning the printer:
• To avoid electric shock, before you start to clean the printer, ensure that the printer is powered off,
then unplug the printer.
• To avoid printer damage such as discoloration, deformities, and cracked covers, do not use
benzene, paint thinner, other volatile liquids, or spray insect repellent on the printer.
• Cleaning the printer with an excessive amount of water can cause the printer to malfunction and
damage documents during copying.
• Document Feeder, Document Cover, and Document Glass information:
–
The document cover is the flat, white surface on the underside of the Duplex Automatic
Document Feeder (DADF). The DADF holds the document in place on the document glass.
–
It is recommended that you clean all components of the document cover and document glass
at the same time. These components consist of the document cover, the document glass, and
the second-side scanning lens assembly.
–
To provide the best image quality possible on your printed or copy output, clean the
document cover and document glass regularly. If the document cover and document glass are
dirty, spots can appear on copies and the printer cannot detect proper document sizes.
–
If you receive the message, The Scanner may be dirty, perform the cleaning procedure
for the document cover and document glass. To clean the scanning glass, refer to the user
guide or the label instructions on the document feeder.
–
The document glass consists of two parts: the document glass and the glass strip. The
document glass is the glass on which you place your document to copy it. The glass strip is a
2.54 cm (1 in.) wide strip of document glass to the left of the document glass.
170
Xerox
®
PrimeLink
User Guide
®
B9100/B9110/B9125/B9136 Copier/Printer