Xerox PrimeLink B9100 User Manual page 425

4. Remove any jammed staples.
WARNING:
5. While holding the tabs on the new staple cartridge, push in the cartridge until it stops.
Note: Ensure that the small arrows are aligned.
6. Push the Saddle Stitch Unit 3 into the finisher until the unit stops.
7. Close the finisher front cover.
To avoid personal injury, use care when removing jammed staples.
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Production Ready Finishers
User Guide
425