Xerox PrimeLink B9100 User Manual page 73

4. If the original documents are 2-sided, select the applicable delete option:
• Both Sides
• Side 1 Only
• Side 2 Only
5. Touch Area 1.
6. To define a specific area, enter the two XY coordinates within a range of 0.0–431.8 mm (0.0–17.0
in.). To navigate from coordinate to coordinate, touch each X and Y setting:
a. To enter the value for Y1, touch the Y1 box. To enter a number range, use the numeric
keypad.
b. To enter the value for Y2, touch the Y2 box. To enter a number range, use the numeric
keypad.
c. To enter the value for X1, touch the X1 box. To enter a number range, use the numeric
keypad.
d. To enter the value for X2, touch the X2 box. To enter a number range, use the numeric
keypad.
To clear a deletion area, touch Clear Area X, then use the numeric keypad and press 1, 2, or 3.
7. Touch Save.
8. Touch Save again.
9. Enter the Quantity, then press the green Start button.
S S t t o o r r e e d d P P r r o o g g r r a a m m m m i i n n g g
You can save frequently used features and job settings as Stored Programming, then access the
settings using a shortcut button. For more information, refer to
The Stored Programming option not only remembers feature settings, but the option can record a
series of operations. This feature enables you to record the hierarchy of displayed screens for each
step. For example, you could use Stored Programming to record the following actions: Press the
Machine Status button, and display the Print Reports screen to print reports.
• You can record up to 100 consecutive operations in each stored program.
• Store up to 40 programs.
• You cannot use the Build Job option with the Stored Programming option.
• There are situations where a stored program becomes invalid:
– When default values or paper tray settings are changed in the system setting, a stored
program becomes invalid.
– When buttons are added or removed from the touch screen, a stored program becomes
invalid. The Stored Programming feature remembers the location only of a button on the
screen, not the name of the button. For example, button positions can change when a job
flow or job template is added or deleted.
– If you change the values of the Watermark feature when a watermark is used in a stored
program, the stored program becomes invalid.
– After the program is stored, if you change the password to the folder that is used in the stored
program, the stored program becomes invalid.
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Stored Programming.
User Guide
Copying
73