Control Panel - Xerox PrimeLink B9100 User Manual

Description
Number
1 Fault indicators: When a fault or jam occurs in a particular area of the SquareFold
device, fault indicators illuminate. When the trimmer waste container is pulled out or when it
is full, the lower indicator, with the lock icon illuminates.
Note:
covers, then the jam or fault is cleared. During normal operation or when the printer is
idle, you cannot open the covers.
2 Select the required square-fold setting. For more information, refer to the
Adjustment
3 To adjust the square-fold book thickness setting, press the button.
S S q q u u a a r r e e F F o o l l d d ® ®
Description
Number
1 The booklet leaves the booklet area of the finisher, then enters the SquareFold
Trimmer device. The booklet exit sensor in the SquareFold
leading edge spine of the booklet, then moves the booklet to the square-fold area.
2 When the booklet spine reaches the square-fold area, the booklet is clamped, and the
square-folding operation begins.
3 The booklet is flattened and the spine is squared according to the square-fold setting
indicated on the control panel.
4 After the booklet is flattened and the spine is squared, the booklet is moved to the
trimmer area.
• Based on the finished booklet size, the booklet is moved until the trailing edge
• The trailing edge is trimmed, based on the finished booklet size entered for the
5 The booklet is moved to the exit area where it is transported to the booklet tray.
Note: Booklets that exit the SquareFold
the previously trimmed booklet. Trim remnant or scrap accumulation is due to normal static
electricity build-up. If booklets contain trim remnants or scraps, remove and discard the
remnants and scraps.
If El, E2, or E3 illuminates on the control panel, you can open the left and right
Settings.
T T r r i i m m m m e e r r P P a a p p e e r r P P a a t t h h
reaches the trimmer cutter.
trimmer mode setting.
®
Xerox ® PrimeLink
Trimmer device contain trim remnants or scraps from
® B9100/B9110/B9125/B9136 Copier/Printer
SquareFold ® Trimmer Module
® Trimmer
Square Fold
®
® Trimmer device detects the
User Guide
437