Xerox PrimeLink B9100 User Manual page 403

P P a a p p e e r r J J a a m m s s i i n n t t h h e e P P R R F F i i n n i i s s h h e e r r P P l l u u s s
When a paper jam occurs in the PR Finisher Plus, an indicator illuminates on the Finisher Module or
the Finishing Transport Module.
The following actions occur when there are faults, such as paper jams, open doors or covers, or a
printer malfunction:
• The printer stops printing and a fault message appears on the printer touch screen.
• The fault message includes an illustration that shows the location of the fault along with a brief
explanation of corrective actions for clearing the fault.
• Paper jams can occur in multiple areas of the printer and in any optional devices that are
connected to the printer. When a paper jam occurs, the illustration changes to show the multiple
locations and the required corrective actions.
• If a fault occurs with an optional device, an indicator illuminates on the optional device control
panel and shows the corresponding area on the device where the fault occurred.
When you clear paper jams, always refer to the following information:
• When you remove paper jams, keep the printer powered on. When you power off the printer, all
information stored to the system memory is erased.
• To minimize print defects, do not touch components inside the printer.
• Before you resume the print jobs, ensure that you clear all paper jams, including torn pieces of
paper.
• Gently, remove torn paper, taking care not to tear it. Ensure that you remove all the torn pieces of
paper.
• After you remove all paper jams, close all doors and covers. When doors or covers are open, the
printer cannot print.
• After you clear a paper jam, printing resumes automatically from the state before the paper jam
occurred.
• If you do not clear all paper jams, an error message continues to appear on the printer touch
screen. To clear any remaining jams, follow the instructions on the printer touch screen.
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Production Ready Finishers
User Guide
403