KEB COMBIVERT R6-S Applications Manual page 79

The following table shows a list of the parameters which can assign digital inputs to the individual functions:
di.09 = reset input selection
di.36 = software ST input selection
di.37 = ST lock input selection
di.38 = turn off ST delay time
Fr.07 = select inputs for paraset
Fr.11 = select inputs for RST set
LE.17 = timer 1 start input selection
LE.19 = timer 1 reset input selection
LE.22 = timer 2 start input selection
LE.24 = timer 2 reset input selection
Pn.04 = ext. fault input selection
The following table shows an overview of all functions, which can be assigned to a digital input with parameters
di.11...di.22 (several functions are possible):
Bit Value
7 128: reset error
11 2048: set selection
12 4096: reset to set 0
13 8192: external error
17 131072: start timer 1
18 262144: reset timer 1
19 524288: start timer 2
20 1048576: reset timer 2
31 2147483648: I+ function
Not listed bits are not assigned.
displays the function-related parameter, which corresponds to the value in di.11...di.22.
1)
The following table displays an overview of the functions, which can be assigned to a digital input with para-
meters di.24...di.35 (only one additional function per input is possible / bit 31 „I+ function must be activated for
the relevant input):
Value
5: Software ST (not at
di.35)
6: ST locking (not at di.35) setting the input causes locking of the software control release
Not listed bits are not assigned.
displays the function-related parameter, which corresponds to the value in di.11...di.22.
1)
© KEB, 2008-02 COMBIVERT R6-S
di.11...di.22: Input functions
Description
trigger reset
select parameter sets
trigger error state at the inverter
Start / Stop Timer
one additional function („+" function) is selected
di.24...di.35: Input- „+" function
Description
any digital input gets the function „control release" (software-
emulation / function can not be placed on the input ST)
Digital in- and outputs
3
Fct. Para
1)
di.09
Fr.07
Fr.11
Pn.04
LE.17
LE.19
LE.22
LE.24
---
10
Fct. Para
1)
di.36
di.37
Seite 3.4 - 9