KEB COMBIVERT R6-S Applications Manual page 37

2.3 Network components
2.3.1 Available hardware
The KEB COMBIVERT R6 can be easily integrated into different networks. For that purpose the inverter is
fitted with an operator that is appropriate for the respective bus system. Following hardware components are
available:
– RS232 cable PC / operator
for operation with interface operator
– HSP5 adapter PC / control board
for operation without operator; RS232 => TTL
– F5 Interface operator
serial networks in RS232 or RS485 standard
– F5 Profibus-DPoperator
– F5 InterBus operator
– InterBus remote bus connection
(in connection with Interface Operator)
– F5 CanOpen operator
– F5 Sercos operator
– Diagnostic interface operator
2.3.2 RS232 cable PC / operator 00.58.025-001D
The cable of 3m length is used for the direct RS232-connection between PC (9-pole SUB-D-connector) and
operator.
9-pole SUB-D coupling
Housing (PE)
The RS232 cable is suitable exclusively for the communication between PC and operator.If the cable is plugged
in directly onto the control board, it can lead to the destruction of the interface of the PC.
© KEB, 2008-02 COMBIVERT R6-S
2
3
5
PC
Network components
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
9-pole SUB-D connector
2
3
7
F5-Operator
00.58.025-001D
00.F5.0C0-0001
00.F5.060-2000
00.F5.060-3000
00.F5.060-4000
00.B0.0BK-K001
00.F5.060-5000
00.F5.060-6000
00.F5.0C0-0020
Page 2.3 - 3
2
10