KEB COMBIVERT R6-S Applications Manual page 84

Digital in- and outputs
Value Function
59 Inputs AND linked (ru.22)
60 Inputs OR linked (ru.22)
61 Inputs NAND linked (ru.22)
62 Inputs NOR linked (ru.22)
Absolute value ANOUT1 >
63
level
65 ANOUT1 > level
73 Value actual power > level
74 Actual power > level
80 AC input current > level
Not listed values are not assigned.
Comparison level 0...7, LE.00...LE.07
These parameters define the switching levels of the different conditions.
Switching level 0 is valid for switching condition 0, switching level 1 is valid for switching condition 1... etc.
Hysteresis 0...7, LE. 08...LE.15
The hysteresis referring to the adjusted values determine parameters LE.08...LE.15.
Hysteresis 0 (LE.08) is valid for switching level 0; LE.09 for switching level 1... etc.
Seite 3.4 - 14 COMBIVERT R6-S
do.00...do.07: Conditions
Description
Function Condition met when:
AND all selected inputs active
OR at least one selected input active
NAND at least one selected input inactive
NOR all selected inputs inactive
The selection of inputs to be linked is made by the comparison level parame-
ters LE.00...LE.07.
Input ST RST F R
Value 1 2 4 8
The sum of the inputs to query is entered in the switching levels.
Example: If condition F,R and I1 shall be linked to condition 0, value 4 + 8 +
16 = 28 must be entered in LE.00.
Value of ANOUT1 (amount of ru.34 „ANOUT1 post ampl. display) higher than
the switching level.
ANOUT1 (ru.34 „ANOUT1 post ampl. display) higher than the switching le-
vel.
Value ru.81 „actual power" > switching level
ru.81 „actual power" > switching level
I1 I2 I3 I4 IA IB
16 32 64 128 256 512
IC ID
1024 2048
© KEB, 2008-02