KEB COMBIVERT R6-S Applications Manual page 113

Input-coded set source
with input-coded set source
- maximally 7 of the internal or external inputs may be programmed to set source (0...7 sets), in order to avoid
set source errors.
- the lowest of the selected inputs has priority at Fr.02 = „3"
(ST>RST>R>F>I1>I2>I3>I4>IA>IB>IC>ID)
- the highest of the selected inputs has priority at Fr.02 = „4"
(ID>IC>IB>IA>I4>I3>I2>I1>R>F>RST>ST)
Example 2: set 0...5 shall be selected with 5 inputs (I1, I2, I3, IB and ID)
1.) Set parameter Fr.07 to value „2672"
2.) Set Fr.02 to value „3" (set source input-coded via terminal strip)
Id IB I3
0 0 0
0 0 0
0 0 0
0 0 3
0 4 0
5 0 0
5 0 3
5 0 3
Reset to set 0 / input selection (Fr.11)
Parameter Fr.11 defines an input, independent of the actual parameter set it can be switched in parameter set
0. This function is only active at Fr.02 = 2...4
- at static input assignment the inverter remains in set 0, as long as the input is set.
- at slope-triggered inputs set 0 is activated with the first slope. With the second slope the activated pa-
rameter set by the other inputs is selected again.
© KEB, 2008-02 COMBIVERT R6-S
I2 I1 Set Set
Fr.02 = 3 4
0 0 0 0
0 1 1 1
2 0 2 2
0 0 3 3
0 0 4 4
0 0 5 5
0 0 3 5
0 1 1 5
Parameter sets
ID
IB
I3
I2
I1
Set
5
Set
4
Set
3
Set
2
Set
1
Set 0
3
10
Page3.7 - 9