KEB COMBIVERT R6-S Applications Manual page 38

Network components
2.3.3 HSP5 cable PC / control board 00.F5.0C0-0010
The HSP5-cable is used for the direct connection between PC and control board. The necessary conversion to
TTL level occurs in the cable.
9-pole SUB-D coupling
PC
2.3.4 Interface operator F5 00.F5.060-2000
A potential-separated RS232/RS484 interface is integrated in the interface operator (00.F5.060-2000). The
telegram structure is compatible to protocol DIN 66019 and ANSI X3.28 as well as to protocol expansion DIN
66019 II.
RS232/RS485
PIN Signal
1 –
2 TxD
3 RxD
4 RxD-A (+) Receive signal A/RS485
5 RxD-B (-) Receive signal B/RS485
6 VP
7 GND
8 TxD-A (+) Transmission signal A/RS485
9 TxD-B (-) Transmission signal B/RS485
Relating to further field bus connections please contact KEB.
Page 2.3 - 4
5 4
9 8
Meaning
reserved
Transmission signal/RS232
Receive signal/RS232
Supply voltage -Plus +5V (Imax=10mA)
Data reference potential; mass for VP
COMBIVERT R6-S
9-pole SUB-D connector
2 1
3
7 6
F5-Control board
© KEB, 2008-02