KEB COMBIVERT R6-S Applications Manual page 50

Operating and appliance data
Parameter
ru.13 Actual DC utilization
Display of the actual utilization referring to the rated current of the regenerative unit. Only positive values
are displayed, whereby a differentiation between supply and regeneration is not possible.
Parameter
ru.14 Actual DC peak utilization
ru.14 enables to recognize short-term peak utilization within an operating cycle. For that the highest value
of ru.13 is stored in ru.14. The peak value memory can be cleared by pressing the UP, DOWN or ENTER
key or via bus by writing any value you like to the address of ru.14. Switching off COMBIVERT R6-S also
clears the memory.
Parameter
ru.15 DC output current
Display of the actual DC output current in ampere.
Parameter
ru.16 DC output current / peak value
ru.16 enables to recognize short-term peak utilization within an operating cycle. For that the highest value
of ru.15 is stored in ru.16. The peak value memory can be cleared by pressing the UP, DOWN or ENTER
key or via bus by writing any value you like to the address of ru.16. Switching off COMBIVERT R6-S also
clears the memory.
Parameter
ru.17 AC input current
Display of the actual input current.
Parameter
DC voltage /
ru.18
reference value
The DC voltage is measured at switching on and stored as reference value. The regenerative level (cS.02)
refers proportionally to this reference value and follows to the mains voltage.
Parameter
ru.19 DC output voltage
Display of the actual DC output voltage. The value is measured at the DC output terminals of the
COMBIVERT R6-S.
Page 3.2 - 6 COMBIVERT R6-S
Addr. R PG E Min. value
020Dh ro - -
Addr. R PG E Min. value
020Eh rw - -
Addr. R PG E Min. value
020Fh ro - -
Addr. R PG E Min. value Max. value Res. [?] Default
0210h rw -
Addr. R PG E Min. value
0211h ro - -
Addr. R PG E Min. value
212h ro - -
Addr. R PG E Min. value
0213h ro - -
Max. value
0 255
Max. value
0 255
Max. value
0,0 6553,5
- 0,0 6553,5
Max. value
-3276,7 3276,7
Max. value
0 1000
Max. value
0 1000
Res. [?] Default
1 % -
Res. [?] Default
1 % -
Res. [?] Default
0,1 A -
0,1 A -
Res. [?] Default
0,1 A -
Res. [?] Default
1 V -
Res. [?] Default
1 V -
© KEB, 2008-02