KEB COMBIVERT R6-S Applications Manual page 93

3.5.5 Optimize the regenerative current
Parameter
cS.04 Control angle
The regenerative current can be optimized with an oscilloscope by the control angle (cS.04) .
The following pictures give an overview of the current at different control angles:
1) Bad current adjustment with smaller angle (diode loss).
*) Over- / undershoot of the current
2) Optimal current flow
© KEB, 2008-02 COMBIVERT R6-S
Regenerative adjustments
Addr. R PG E Min.
value
0F04h rw - -
Max. Res.
value
0 600 1
[?] Default
- var
3
10
Page 3.5 - 5