KEB COMBIVERT R6-S Applications Manual page 31

2.2 Password structure
The KEB COMBIVERT is equipped with an extensive password protection. With the individual passwords it is
possible:
Dependent on the actual operation mode the password can be entered in the following parameters:
2.2.1 Password levels
The parameter value of the parameters above displays the actual password level. The following displays are
possible:
© KEB, 2008-02 COMBIVERT R6-S
- to change the operating mode
- to set a write protection
- to activate the service mode
if the CP mode is activated
if the application mode is activated
CP - read only
CP - on
CP - Service
Application
Password structure
Only the customer parameter group is visible, all
parameters are in read only status, except CP.0
(see chapter 4.3).
Only the customer parameter group is visible. All
parameters can be changed.
Like CP-on, however the parameter identification
is displayed in accordance with its origin parameter
(see chapter 4.3)
All application parameters are visible and can be
changed. The CP-Parameters are not visible.
2
10
Page 2.2 - 3