KEB COMBIVERT R6-S Applications Manual page 48

Operating and appliance data
3.2.2 Overview of the In parameters
In parameter groups contain data and information for the identification of the hardware and software as well as
for the type and number of occurred errors. Following parameters are available:
In.00 inverter type
In.01 DC rated current
In.06 software version
In.07 software date
In.10 serial no. (date)
In.11 serial no. (count)
In.12 serial no. (AB high)
In.13 serial no. (AB low)
In.14 customer no. (high)
In.15 customer no. (low)
In.16 QS no.
In.22 user parameter 1
In.23 user parameter 2
In.24 last error
In.25 error diagnosis
In.26 E.OC error counter
In.27 E.OL error counter
In.28 E.OP error counter
In.29 E.OH error counter
In.30 E.OHI error counter
3.2.3 Overview of the SY parameters
The SY parameter group contains system-specific parameters. Following parameters are available:
SY.02 inverter identifier
SY.03 power unit code
SY.06 inverter address
SY.07 baud rate ext. bus / PC
SY.09 HSP5 watchdog time
SY.11 baud rate int. bus
SY.32 scope timer
SY.41 control word high
SY.42 status word high
SY.43 control word long
SY.44 status word long
SY.50 control word low
SY.51 status word low
SY.56 start display address
Page 3.2 - 4 COMBIVERT R6-S © KEB, 2008-02