Danfoss VLT AutomationDrive FC 300 Programming Manual page 35

Parameter Descriptions
0-51 Set-up Copy
Option: Function:
[0] No copy No function
[1] Copy to set- Copies all parameters in the present
up 1 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 1.
[2] Copy to set- Copies all parameters in the present
up 2 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 2.
[3] Copy to set- Copies all parameters in the present
up 3 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 3.
[4] Copy to set- Copies all parameters in the present
up 4 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 4.
[9] Copy to all Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.
3.2.7 0-6* Password
0-60 Main Menu Password
Range: Function:
100 [-9999 - Define the password for access to the Main
*
9999 ] Menu via the [Main Menu] key. If
0-61 Access to Main Menu w/o Password is
set to [0] Full access, this parameter will be
ignored.
0-61 Access to Main Menu w/o Password
Option: Function:
[0] Full access Disables password defined in 0-60 Main
Menu Password.
[1] LCP: Read only Prevent unauthorized editing of Main Menu
parameters.
[2] LCP: No access Prevent unauthorized viewing and editing of
Main Menu parameters.
[3] Bus: Read only Read-only functions for parameters on
Fieldbus and/or FC standard bus.
[4] Bus: No access No access to parameters is allowed via
Fieldbus and/or FC standard bus.
[5] All: Read only Read-only function for parameters on LCP,
Fieldbus or FC standard bus.
[6] All: No access No access from LCP, Fieldbus or FC standard
bus is allowed.
If Full access [0] is selected then 0-60 Main Menu Password,
0-65 Personal Menu Password and 0-66 Access to Personal
Menu w/o Password will be ignored.
®
VLT AutomationDrive Programming Guide
NOTE
A more complex Password protection is available for OEMs
upon request.
0-65 Quick Menu Password
Range:
200
0-66 Access to Quick Menu w/o Password
Option:
[0] Full access
[1] LCP: Read only Prevents unauthorised editing of Quick Menu
[3] Bus: Read only Read only functions for Quick Menu
[5] All: Read only
If 0-61 Access to Main Menu w/o Password is set to [0] Full
access then this parameter will be ignored.
0-67 Bus Password Access
Range:
0
0-68 Safety Parameters Password
Range:
300
0-69 Password Protection of Safety Parameters
Option:
[0]
[1]
®
MG33MG02 - VLT is a registered Danfoss trademark
Function:
[-9999 - Define the password for access to the Quick
*
9999 ] Menu via the [Quick Menu] key. If
0-66 Access to Quick Menu w/o Password is
set to [0] Full access, this parameter will be
ignored.
Function:
Disables the password defined in 0-65 Quick
Menu Password.
parameters.
parameters on Fieldbus and/ or FC standard
bus.
read only function for Quick Menu
parameters on LCP, Fieldbus or FC standard
bus.
Function:
[0 - 9999 ] Writing to this parameter enables users to
*
unlock the frequency converter from bus/MCT
10 Set-up Software.
[0 - 9999 ]
*
Disabled
Enabled
3
Function:
Function:
33
3