Danfoss VLT AutomationDrive FC 300 Programming Manual page 98

Parameter Descriptions
5-97 Pulse Out #X30/6 Bus Control
Range:
0 % [0 - 100 %] Set the output frequency transferred to the
*
3 3
5-98 Pulse Out #X30/6 Timeout Preset
Range:
0 % [0 - 100 %] Set the output frequency transferred to the
*
96
®
VLT
Function:
output terminal X30/6 when the terminal is
configured as [45] Bus ctrl. in 5-66 Terminal
X30/6 Pulse Output Variable.
Function:
output terminal X30/6 when the terminal is
configured as [48] Bus Ctrl Timeout in
5-66 Terminal X30/6 Pulse Output Variable.
And a time-out is detected.
MG33MG02 - VLT
AutomationDrive Programming Guide
®
is a registered Danfoss trademark