Danfoss VLT AutomationDrive FC 300 Programming Manual page 151

Parameter Descriptions
15-63 Option Serial No
Array [8]
Range: Function:
0 [0 - 0 ] View the installed option serial number.
*
15-70 Option in Slot A
Range: Function:
0 [0 - 0 ] View the type code string for the option installed
*
in slot A, and a translation of the type code string.
E.g. for type code string 'AX' the translation is 'No
option'.
15-71 Slot A Option SW Version
Range: Function:
0 [0 - 0 ] View the software version for the option installed
*
in slot A.
15-72 Option in Slot B
Range: Function:
0 [0 - 0 ] View the type code string for the option installed
*
in slot B, and a translation of the type code string.
E.g. for type code string 'BX' the translation is 'No
option'.
15-73 Slot B Option SW Version
Range: Function:
0 [0 - 0 ] View the software version for the option installed
*
in slot B.
15-74 Option in Slot C0/E0
Range: Function:
0 [0 - 0 ] View the type code string for the option installed
*
in slot C, and a translation of the type code string.
E.g. for type code string 'CXXXX' the translation is
'No option'.
15-75 Slot C0/E0 Option SW Version
Range: Function:
0 [0 - 0 ] View the software version for the option installed
*
in slot C.
15-76 Option in Slot C1/E1
Range: Function:
0 [0 - 0 ] Displays the type code string for the option in slot
*
C1. (CXXXX if no option) and the translation i.e.
>No option<.
15-77 Slot C1/E1 Option SW Version
Range: Function:
0 [0 - 0 ] Displays the software version for the installed
*
option in option slot C.
®
VLT AutomationDrive Programming Guide
15-80 Fan Running Hours
Range:
0 h
15-81 Preset Fan Running Hours
Range:
0 h
15-89 Configuration Change Counter
Range:
0
3.16.7 15-9* Parameter Info
Parameter Info
15-92 Defined Parameters
Array [1000]
Range:
0
15-93 Modified Parameters
Array [1000]
Range:
0
15-98 Drive Identification
Range:
0
15-99 Parameter Metadata
Array [30]
Range:
0
®
MG33MG02 - VLT is a registered Danfoss trademark
Function:
[0 - 2147483647 h] View how many hours the heatsink
*
fan has run (increments for each
hour). The value is saved when the
frequency converter is turned off.
[0 - 99999 h]
*
[0 - 65535 ]
*
Function:
[0 - 9999 ] View a list of all defined parameters in the
*
frequency converter. The list ends with 0.
Function:
[0 - 9999 ] View a list of the parameters that have been
*
changed from their default setting. The list
ends with 0. Changes may not be visible until
up to 30 s after implementation.
[0 - 0 ]
*
Function:
[0 - 9999 ] This parameter contains data used by the MCT
*
10 Set-up Software.
Function:
Function:
Function:
149
3 3