Ii-1-2 Internet Access - Draytek Vigor2133 User Manual

I I - 1 - 2 I n
I I - 1 - 2 I n
This page allows you to set WAN configuration with different modes. Use the Connection Type
drop down list to choose one of the WAN modes. The corresponding page will be displayed.
Available settings are explained as follows:
Item
Index
Display Name
Physical Mode
Access Mode
Details Page
IPv6
DHCP Client Option
Vigor2133 Series User's Guide
t e r n e t A c c e s s
t e r n e t A c c e s s
Description
Display the WAN interface.
It shows the name of the WAN1/WAN2/WAN3 /WAN4 that
entered in general setup.
It shows the physical connection for WAN (Ethernet or fiber)
according to the real network connection.
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number and
data information when such function is enabled and
configured.
Enable – Check the box to enable the function of DHCP
43