gefran AFE200 4 Series Instruction Manual page 88

Menu PAR Description
4.14 574 Startup display
It is possible to set the parameter that will automatically be displayed when the AFE is
switched on. If set to -1 the AFE moves to the display menu.
Menu PAR Description
4.15 576 Display backlight
Enabling of the backlight on the AFE display.
If set to 0 the display backlight will go off when the AFE has been on for three minutes.
If set to 1 the backlight will stay on for as long as the AFE is powered.
Menu PAR Description
4.16 578 Language select
Setting of the AFE programming language.
0 English
1 Italiano
2 Francais
3 Deutsch
4 Espanol
5 Polish
6 Romanian
7 Russian
8
Turkish
9 Portuguese
Note!
The Load Default command (par. 580) does not modify this parameter.
Menu PAR Description
4.17 580 Load default
Transfers the standard factory settings to the AFE memory ("Def" column in the pa-
rameters table).
Menu PAR Description
4.18 590 Save par to keypad
Transfers the parameters currently stored in the AFE and saves them in the keypad
memory.
Menu PAR Description
4.19 592 Load par from keypad
Transfers the parameters from the keypad memory to the AFE.
Menu PAR Description
4.20 594 Keypad memory select
Selection of the area of the keypad memory to which to transfer and save the param-
eters stored in the AFE.
88
UM Type FB BIT
INT16
UM Type FB BIT
BIT
UM Type FB BIT
ENUM
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
UINT16
AFE200 • Instruction Manual
Def Min
-1 -1
Def Min
0 0
Def Min
English 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
1 1
Max Acc
20000 ERW
Max Acc
1 ERW
Max Acc
9 RWZ
Max Acc
1 RWZ
Max Acc
1 RW
Max Acc
1 RWZ
Max Acc
5 ERW