gefran AFE200 4 Series Instruction Manual page 105

The value of the voltage output of the function block of the relative analog input is
displayed.
Menu PAR Description
9.34 1602 Analog inp 1X type
9.45 1652 Analog inp 2X type
Selection of the type of expansion card input (voltage or current input). Depending on
the input signal, move the switches on the regulation card. Standard inputs are coded
for voltage signals.
0 -10V..+10V
1 0.20mA ... 0.10V
2 4..20mA
Select option 0 in order to connect a maximum voltage of ±12.5V (typically ±10V/5mA)
to the analog input concerned. If the signal is used as a reference, reverse the direc-
tion of rotation of the drive by inverting the voltage polarity.
Select option 1 to connect a max voltage of 12.5V (typically 10V/5mA) or a signal in
current from 0 ... 20 mA to the analog input concerned. The signal must be positive.
Select option 2 to connect a current signal of 4...20 mA to the analog input concerned.
The signal must be positive.
Menu PAR Description
9.35 1604 Analog inp 1X scale
9.46 1654 Analog inp 2X scale
Setting of a multiplier factor to apply to the relative analog input of the expansion card.
Example :
The speed reference of a drive is assigned with a max external voltage of 5V.
As the Analog inp X scale parameter the scale factor of 2 is entered (10V : 5V).
Menu PAR Description
9.36 1606 An inp 1Xoffset tune
UM
UM
Speed
100%
50%
0
UM
AFE200 • Instruction Manual
Type FB BIT Def
ENUM -10V..+10V
ENUM -10V..+10V
Type FB BIT Def
FLOAT 1.0
FLOAT 1.0
2
1
5V
10V
Type FB BIT Def
BIT 0
Min Max
0 2
0 2
Min Max
-20.0 20.0
-20.0 20.0
1
Analog inp xX scale = 1,0
Analog inp xX scale = 2,0
2
Min Max
0 1
Acc
RW
RW
Acc
RW
RW
Acc
RWZ
105