gefran AFE200 4 Series Instruction Manual page 154

Menu PAR Description
- 5800 FL Fwd 1 inv mon
- 5802 FL Fwd 2 inv mon
- 5804 FL Fwd 3 inv mon
- 5806 FL Fwd 4 inv mon
- 5808 FL Fwd 5 inv mon
- 5810 FL Fwd 6 inv mon
- 5812 FL Fwd 7 inv mon
- 5814 FL Fwd 8 inv mon
These parameters are not used on the master drive.
On the slave drive these parameters show the value received from the previous drive.
The " Inv" parameters enable the value received to be used with the opposite sign,
without changing any of the data sent to subsequent slaves.
These parameters are available in the "src" analog parameter selection lists.
Menu PAR Description
- 6000 Null
This signal forces the variable to the zero level (always disabled).
Menu PAR Description
- 6002 One
This signal forces the variable to level one (always active).
154
Bit Description
2 1 = PLC 3 fault active
3 1 = PLC 4 fault active
4 1 = PLC 5 fault active
5 1 = PLC 6 fault active
6 1 = PLC 7 fault active
7 1 = PLC 8 fault active
UM
UM
UM
AFE200 • Instruction Manual
Type FB BIT Def
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
INT32 32BIT 0
Type FB BIT Def
UINT32 32BIT 0
Type FB BIT Def
UINT32 32BIT 1
Min Max Acc
0 0 ER
0 0 ER
0 0 ER
0 0 ER
0 0 ER
0 0 ER
0 0 ER
0 0 ER
Min Max Acc
0 0 ER
Min Max Acc
1 1 ER