Regulation Section; Removing The Terminal Cover; Cable Cross Section; Regulation Section Connection - gefran AFE200 4 Series Instruction Manual

5.2 Regulation section

5.2.1 Removing the terminal cover

When removing the covers be carefull to lateral metal sheet enclosure. Presence of
sharp edge are possible.
Warning!

5.2.2 Cable Cross Section

Terminal strips
(Regulation card)

5.2.3 Regulation section connection

For shielding of the regulation section (recommended), fasten the shield of the
cables to the omega sections (see figure above).
36
A
Maximum Cable Cross Section
(mm ) (AWG)
2
0.2 ... 2.5 24 ... 12
Figure 5.2.3.1: Regulation shielding
AFE200 • Instruction Manual
A
Recommended stripping
(mm)
7
Tightening torque (min)
(min)
(Nm)
0.5