A 2.2 Compatibility Of Igbt Modules - gefran AFE200 4 Series Instruction Manual

A 2.2 Compatibility of IGBT modules

Starting from July 2015, the following 690V products based on power stack 315kW
and 355kW, which use IGBT modules "INFINEON" branded, will be manufac-
tured with power modules "FUJI" branded too. Both types have same mechanical
dimensions but they cannot combined together.
When replacing the IGBT modules on an existing product, it must be checked
the "Prod Configuration" on the label for the correct replacement. IGBT module
installed in the drive must be all the same type. See "Firmware & cards revision" in
Attention
chapter
The following rules must be strictly followed:
•
•
Caution
•
194
MODEL
INFINEON
FUJI
Code
S9AF53 AFE200-73150-KXX-6
S9AF53M AFE200-73150-KXX-6-MS 06
S9AF53M1 AFE200-73150-KXX-6-MS 09
S9AF53S AFE200-73150-XXX-6-SL
S9AF54 AFE200-73550-KXX-6
S9AF54M AFE200-73550-KXX-6-MS 07
S9AF54M1 AFE200-73550-KXX-6-MS 10
S9AF54M4 AFE200-73550-KXX-6-MS 14
S9AF54M5 AFE200-73550-KXX-6-MS 17
S9AF54S2 AFE200-73550-XXX-6-SL2
"2.1 Product type designation" on page 12.
IGBT modules installed in the drive must be all same type / typology.
Master / Slave products configuration must necessarily be made with the
same IGBT type. It will be not possible to use drive with different product
configuration between master and slave.
For repair in field, the replacement of an IGBT module may be carry out with
same type. It will be not possible to use drive Master with Infineon power
module and drive Slave with Fuji power module and vice versa.
AFE200 • Instruction Manual
Code
S8HRS20
S8HRS44
Type
configuration with
Module INFINEON
Type
MODULE-IGBT6-1K7V 450A
MODULE-IGBT6-1K7V 450A
Product Product
configuration with
Module FUJI
A1...B2 B3