gefran AFE200 4 Series Instruction Manual page 139

14.8.24 5856 FL Rev 4 mon
Display of data selected via parameters FL Rev X Slave sel corresponding (PAR
5822 ... 5828).
Menu PAR Description
14.8.25 5822 FL Rev 1 slave sel
14.8.26 5824 FL Rev 2 slave sel
14.8.27 5826 FL Rev 3 slave sel
14.8.28 5828 FL Rev 4 slave sel
Parameter significant only for Master drive, indicates what data of which Slave drive to
display in parameter FL Rev X mon (you can choose to display word 1 or 2 of a Slave
with address from 2 to 16). The code used assigns the significance of the first word of
the Slave at address 2 to value 0, value 1 for the first word of the Slave at address 3
.... 14 first word of the Slave at address 16, 15 has no significance, 16 second word of
Slave at address 2 ... 30 second word of Slave at address 16.
Menu PAR Description
14.8.29 5720 Sync slave mon
This parameter is not significant on the master drive.
On the slave drives this parameter indicates the state of the function that enables
Pwm signals to be synchronised with the Pwm signals of the master and execution of
control tasks to be synchronised with execution of control tasks of the master.
0 Slave not synchronised
1 Slave synchronised
Menu PAR Description
14.8.30 5722 FL fault code
This parameter is used to display the cause of the FastLink fault alarm.
See paragraph
INT32
UM Type
UINT16
UINT16
UINT16
UINT16
UM Type
BIT
UM Type
UINT32
"9.1.2 "Fastlink fault" Alarm" on page 164.
AFE200 • Instruction Manual
32BIT 0
FB BIT Def
0
0
0
0
FB BIT Def
16BIT 0
FB BIT Def
0
0 0 ER
Min Max Acc
0 31 ERWZ
0 31 ERWZ
0 31 ERWZ
0 31 ERWZ
Min Max Acc
0 1 ER
Min Max Acc
0 0 ER
139