gefran AFE200 4 Series Instruction Manual page 81

2 - DRIVE INFO
This menu displays the information for identifying and configuring the AFE.
Menu PAR Description
2.1 482 Drive size
The AFE size identification code is displayed.
Menu PAR Description
2.2 484 Drive family
The available mains voltage is displayed (e.g. 400V). The undervoltage alarm refers to
this voltage value.
The condition No power occurs when the regulation board has just left from produc-
tion and has never been configured for any power. The configuration adjustment for
a given power is achieved by linking it to a power board and running a Save param-
eters.
0
No Power
1 380V..480V
2 500V..575V
3 690V
4 230V
5 270V
Menu PAR Description
2.3 486 Drive region
Setting of the geographical area in which the AFE is to be used (Europe or USA). This
setting determines the factory voltage and power supply frequency values (e.g. when
set to 0 the default voltage is 400V and frequency 50Hz).
0 EU
1 USA
Menu PAR Description
2.4 488 Drive cont current
The current that the AFE can deliver continuously according to size, supply voltage and
programmed switching frequency is displayed.
Menu PAR Description
2.5 490 Firmware ver.rel
The version number and release number of the AFE firmware are displayed. On the
keypad these are displayed in the version.release format. The parameter reading from
the serial communication device or fieldbus returns the version in the high byte and
the release in the low byte.
Menu PAR Description
2.6 496 Firmware type
The type of firmware installed in the AFE is displayed.
UM Type FB BIT
UINT16
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
UM Type FB BIT
A FLOAT
UM Type FB BIT
UINT16
UM Type FB BIT
UINT16
AFE200 • Instruction Manual
Def Min
0 0
Def Min
No Power 0
Def Min
EU 0
Def Min
CALCF 0.0
Def Min
0 0
Def Min
0 0
Max Acc
0 RS
Max Acc
0 RS
Max Acc
1 R
Max Acc
0.0 RZS
Max Acc
0 R
Max Acc
0 R
81