Switches, Jumpers And Led - gefran AFE200 4 Series Instruction Manual

It is not suitable to power supply the regulation card only through a unique rectifier and
capacitive filter.
La tension de + 24Vdc utilisée pour alimenter extérieurement la carte de régulation doit être
stabiliséeet avec une tolérance de ±10% ; absorption maximum de 1A. Les alimentations
obtenues avec les seules redresseur e filtre capacitive ne sont pas appropriées.

5.2.4 Switches, jumpers and LED

Switch V/I settings on inputs and analog output
Analog input 1
S1
Default = voltage (
Analog input 2
S2
Default = voltage (
Analog output 2
S3
Default = voltage (
Jumpers
HC0
Reserved. Deafult = Open
HC1
Open = 400 Vac rated voltage (default)
CFG
Closed = 460 Vac rated voltage
38
Jumpers :
Switches :
S1
±10 V)
±10 V)
±10 V)
Function
AFE200 • Instruction Manual
HC0
HC1
CFG
LEDs :
S1
V I
S2 S3
LEDs
PWM
LED lit during IGBT modulation
(green)
Flashes (freq. 1 sec) if no errors or faults
RUN have occurred.
(green) If ON or OFF, indicates an error conditions
(software hangup)
PWR ON when the regulation card is correctly
(green) powered
PWM
RUN
PWR
S2 S3
V I V
Function
I