gefran AFE200 4 Series Instruction Manual page 120

13 - FUNCTIONS
13.1 -
Reserved for AFE200-PV.
13.2 - FUNCTIONS/DOUBLE PAR SET
Two independent sets of parameters can be stored in the AFE200. These can be selected via the
keypad or by using an external command.
This makes it possible to change all the AFE parameters quickly and automatically according to the
various operating requirements.
Menu PAR Description
13.2.1 3300 Par set enable
Enabling of management of two parameter sets
0 Disable
1 Enable
When set to 0 only one parameter set is managed (the one used as the default set).
If set to 1 two separate parameter sets can be configured. These can be selected us-
ing a command signal on a digital input of the terminal strip.
Menu PAR Description
13.2.2 3302 Par set select src
L�DIGSEL2
Selection of the origin (source) of the signal to be used to select the parameter set to
be used. The terminal or digital command that can be associated with this function
can be selected from among those available in the "L_DIGSEL2" selection list.
120
UM Type FB BIT
ENUM
UM Type FB BIT
LINK 16
AFE200 • Instruction Manual
Def Min
Disable 0
Def Min
6000 0
Max Acc
1 ERW
Max Acc
16384 ERWZ