gefran AFE200 4 Series Instruction Manual page 140

15 - ALARM CONFIG
In the ALARM CONFIG menu the type of effect any alarm signals have on the AFE product is deter-
mined:
- The alarm status is saved
- How must the AFE product react to the alarm signal?
- Auto restart
- Alarm reset
For some alarms, behaviour can be configured separately for each signal, while for the others the Dis-
able AFE product is executed. Individual signals can also be sent to a programmable digital output.
Activity Ignore
Warning
Disable drive The alarm is inserted in the alarm list, it is inserted in the alarm log, it is
n alarms with Activity = Ignore or Warning can be enabled at the same time.
If an alarm with Activity = Stop or Fast Stop is enabled and another alarm with an Activity other than
Ignore or Warning is enabled, the AFE product stops and is disabled
Not all alarms allow the controlled stopping of the AFE product. The following table shows the possibil-
ity of setting the Activities for the individual alarm signals.
Alarm
ExtFlt activity
ExtFlt restart
UndervoltAC activity
UndervoltAC restart
Overvolt AC activity
Overvolt AC restart
Drive ovld activity
HTsens restart
InAir activity
InAir restart
Desat restart
IOverC restart
OverV restart
UnderV restart
Optionbus activity
140
The alarm is not included in the list of alarms, it is not included in the
alarm log, it is not signalled on the digital outputs, no AFE product com-
mands are modified.
The alarm is included in the list of alarms, it is included in the alarm log, it
is signalled on the digital outputs, the First alarm information is updated,
the Alarm enabled information is updated, no AFE product commands are
modified.
signalled on the digital outputs, the First alarm data is updated, the Alarm
active data is updated, the AFE product is disabled.
PAR
4504
4506
4534
4536
4554
4556
4570
4582
4600
4602
4610
4620
4630
4640
4670
AFE200 • Instruction Manual
Ignore Warning
√ √
- -
√ √
- -
√ √
- -
√ √
- -
√ √
- -
- -
- -
- -
- -
√ √
Disable drive
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√