gefran AFE200 4 Series Instruction Manual page 86

1 Done
The parameter displays the Required message when the motor parameters that have
been entered need to be saved. When they have been saved the parameter indicates
Done.
Menu PAR Description
4.7 558 Application select
Selection of which IEC 61131-3-compliant application to make operational.
0
None
1 Application 1
2 Application 2
Note!
The Load Default command (par. 580) does not modify this parameter
.
Menu PAR Description
4.8 560 Mains voltage
Setting of the available mains voltage value in Volts. Detection of the undervoltage
alarm refers to this value.
0
320 V
1 270 V
2 290 V
3 230 V
4
380V
5 400 V
6 415 V
7 440 V
8 460 V
9 480 V
10 500 V
11 575 V
12 690 V
Menu PAR Description
4.9 552 Mains frequency
Setting of the value of the available mains frequency in Hz.
0 50 Hz
1 60 Hz
Menu PAR Description
4.10 562 Switching frequency
Setting of the switching frequency value in kHz. The maximum value that can be set
depends on the size of the AFE.
This must not be changed because changing the default setting may affect perform-
ance of the LCL filter.
0
1 kHz
1 2 kHz
2 3 kHz
86
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
AFE200 • Instruction Manual
Def Min
None 0
Def Min
400 V SIZE
Def Min
50 Hz 0
Def Min
SIZE SIZE
Max Acc
2 ERWZ
Max Acc
SIZE ERWZS
Max Acc
1 ERWZS
Max Acc
SIZE ERWS