gefran AFE200 4 Series Instruction Manual page 167

Error message shown on the
display
Power config
Save par failed
1
Sub-code
Condition: may occur during recognition of power cards. The AFE cannot be enabled when this
message is shown.
0020H-32 The power card is configured for a AFE that is incompatible with the regulation card
0021H-33 The configuration of the power card is not compatible with the regulation card
0017H-23 The configuration required is not available on the power card
Solution: Download the correct configuration on the power card
Condition: during transfer of the parameters from the AFE to the memory of the keypad
0H-0 Communication error
0025H-37 The data saved on the keypad are not valid
0026H-38 Incompatible AFE series
0027H-39 Incompatible software version
0028H-40 Incompatible AFE size
0029H-41 Error during saving of parameters on the AFE
Solution:
AFE200 • Instruction Manual
Description
167