A 2.7 Jumpers And Switches; A 2.8 Leds - gefran AFE200 4 Series Instruction Manual

A 2.7 Jumpers and Switches

INT-P-ADV (MASTER and SLAVE) cards
The jumpers and switches on these cards are factory-set. DO NOT change these
settings.

A 2.8 LEDs

The cards incorporate a LED diagnostics system for rapid analysis of everything
happening on a multi-unit AFE.
INT-P-ADV (MASTER and SLAVE) cards
LEDS
Colour
≤ F (*) ≥ L (*)
H1 D119 Green +15V�PWR�U monitor
H2 D120 Green +15V�PWR�V monitor
H3 D121 Green +15V�PWR�W monitor
H4 D123 Green +15V monitor
H5 D125 Green -15V monitor
H6 D129 Green +3,3V monitor
D25 Green +3,3V R monitor
H16 D122 Green +24V monitor
H17 D124 Green +5V monitor
DP* D128 Green
H7 D67/D64 Red
H8 D68/D65 Red
H9 D69/D66 Red
H10 D126 Red
MONITOR
It switches on after power supply start-up when the FPGA configuration
sequence is complete
ALARM
PHASE U
They light up to indicate a short circuit between the output
PHASE V
phases
PHASE W
It lights up to indicate a power rectifier heat sink overtemperature
AFE200 • Instruction Manual
FUNCTION
INT-P-ADV (≥ Rev L)
Normal
functioning
On
On
On
On
On
On
On
On
On
On
Off
Off
Off
Off
199