Transport And Storage; General - gefran AFE200 4 Series Instruction Manual

3 - Transport and storage

Correct transport, storage, erection and mounting, as well as careful operation and
maintenance are essential for proper and safe operation of the equipment.
Protect the AFE200 against physical shocks and vibration during transport and storage.
Also be sure to protect it against water (rainfall) and excessive temperatures.
Caution
Le bon accomplissement des opérations de transport, de stockage, d'installation et de mon-
tage, ainsi que l'exploitation et l'entretien minutieux, sont essentiels pour garantir à l'appareil
un fonctionnement adéquat et sûr.
If the AFE have been stored for longer than two years, the operation of the DC link
capacitors may be impaired and must be "reformed". Before commissioning devices
that have been stored for long periods, connect them to a power supply for two hours
with no load connected in order to regenerate the capacitors, (the input voltage has to
be applied without enabling the AFE).
En cas de stockage des AFE pendant plus de deux ans, il est conseillé de contrôler l'état
des condensateurs CC avant d'en effectuer le branchement. Avant la mise en service des
appareils, ayant été stockés pendant long temps, il faut alimenter variateurs à vide pendant
deux heures, pour régénérer les condensateurs : appliquer une tension d'alimentation sans
actionner le AFE.

3.1 General

A high degree of care is taken in packing the AFE200 product and preparing them
for delivery. They should only be transported with suitable transport equipment
(see weight data). Observe the instructions printed on the packaging. This also ap-
plieswhen the device is unpacked and installed in the control cabinet.
Upon delivery, check the following:
-
-
Open the packaging with suitable tools. Check whether:
-
-
In the event of any damage or of an incomplete or incorrect delivery please notify
the responsible sales offices immediately. The devices should only be stored in
dry rooms within the specified temperature ranges .
Note!
A certain degree of moisture condensation is permissible if this arises from changes in temperature.
This does not, however, apply when the devices are in operation. Always ensure that there is no
moisture condensation in devices that are connected to the power supply!
14
the packaging for any external damage
whether the delivery note matches your order.
any parts were damaged during transport
the device type corresponds to your order
AFE200 • Instruction Manual