gefran AFE200 4 Series Instruction Manual page 129

0 Not assigned
1 Count 16
2
Count 32
3 Fill 16
4 Fill 32
5 Mdplc 16
6
Mdplc 32
7 EU
8 Eu float
9 Par 16
10 Par 32
If set to 0 the channel is not assigned.
If set to 1 the datum is assigned a 16-bit count.
If set to 2 the datum is assigned a 32-bit count.
If set to 3 16 bits on the channel are reserved for the datum, not used.
If set to 4 32 bits on the channel are reserved for the datum, not used.
If set to 5 the datum is assigned a 16-bit count used by MDPLC.
If set to 6 the datum is assigned a 32-bit count used by MDPLC.
If set to 7 the datum is assigned engineering units on a 16-bit integer.
If set to 8 the datum is assigned engineering units on a 32-bit integer.
If set to 9, the datum is assigned a 16-bit integer engineering unit format not in real
time (5-10ms)
If set to 10 the datum is assigned a 32-bit integer engineering unit format or float for-
mat if the associated parameter is a float-type parameter not in real time (5-10ms)
Note!
If the sys parameter is not assigned, none of the subsequent fieldbus channels are read, even if
programmed.
Menu PAR Description
14.3.3 4024 Fieldbus M->S1 mon
14.3.7 4034 Fieldbus M->S2 mon
14.3.11 4044 Fieldbus M->S3 mon
14.3.15 4054 Fieldbus M->S4 mon
14.3.19 4064 Fieldbus M->S5 mon
14.3.23 4074 Fieldbus M->S6 mon
14.3.27 4084 Fieldbus M->S7 mon
14.3.31 4094 Fieldbus M->S8 mon
14.3.35 4104 Fieldbus M->S9 mon
14.3.39 4114 Fieldbus M->S10 mon
14.3.43 4124 Fieldbus M->S11 mon
14.3.47 4134 Fieldbus M->S12 mon
14.3.51 4144 Fieldbus M->S13 mon
14.3.55 4154 Fieldbus M->S14 mon
14.3.59 4164 Fieldbus M->S15 mon
14.3.63 4174 Fieldbus M->S16 mon
The value received from the bus is displayed. This parameter must be associated with
the src parameter to enable the M->S channel.
The user may modify the M->S and by S->M sys parameters. The consistency of the
sys with the parameter assigned to the channel is checked.
Check for channels M->S:
UM Type FB BIT
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
INT32 32
AFE200 • Instruction Manual
Def Min
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Max Acc
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
129