Configuring Subscriber Information Parameters - Cisco SPA301 Administration Manual

Configuring SIP, SPCP, and NAT
Configuring SIP
STEP 1
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Proxy Fallback Intvl
Proxy Redundancy
Method
Click Submit All Changes.

Configuring Subscriber Information Parameters

To configure subscriber information parameters for each extension, navigate to
Admin Login > advanced > Voice > Ext_n. Under Subscriber Information,
configure the following fields:
Parameter
Display Name
User ID
Password
Description
Sets the delay after which the phone retries from
the highest priority proxy (or outbound proxy) after
it has failed over to a lower priority server.
The phone should have the primary and backup
proxy server list from a DNS SRV record lookup on
the server name. It needs to know the proxy
priority; otherwise, it does not retry.
The range is from 0 to 65535. Defaults to 3600
seconds.
The phone creates an internal list of proxies
returned in the DNS SRV records.
Select Normal to create a list that contains proxies
ranked by weight and priority.
Select Based on SRV and the phone creates a
Normal list, then inspects the port numbers based
on the first-listed proxy port. When the weight and
priority match, the device selects the first port in
the list. Defaults to Normal.
Description
Name displayed as the caller ID.
Extension number for this line.
Password for this line. Defaults to blank (no password
required).
4
139