Configuring Response Status Code Handling; Configuring Rtp Parameters - Cisco SPA301 Administration Manual

Hide thumbs Also See for SPA301:
Table of Contents

Advertisement

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Configuring Response Status Code Handling

To configure response status code handling , under Response Status Code
Handling make these changes:
SIT1 through SIT4 RSC
Special Information Tone (SIT). If you set the SIT1 RSC to 404, when the
user makes a call and a failure code of 404 is returned, the SIT1 tone is
played. The Reorder or Busy tone is played by default for all unsuccessful
response status code for SIT 1 RSC through SIT 4 RSC. Defaults to blank.
Try Backup RSC—SIP response code that retries a backup server for the
current request. Defaults to blank.
Retry Reg RSC—Interval the device waits before re-trying registration after
a failed registration. Defaults to blank.

Configuring RTP Parameters

To configure Real-time Transport Protocol (RTP), navigate to Admin Login >
advanced > Voice > SIP. Under RTP Parameters, configure these fields:
RTP Port Min—Minimum port number for RTP transmission and reception.
<RTP Port Min> and <RTP Port Max> defines a range that contains at least
10 even number ports (twice the number of lines); for example, 100–106.
Defaults to 16384.
RTP Port Max—Maximum port number for RTP transmission and reception.
<RTP Port Min> and <RTP Port Max> should define a range that contains at
least 10 even number ports (twice the number of lines); for example, 100–
106. Defaults to 16482.
RTP Packet Size—Packet size in seconds. The range is from 0.01 to 0. 1 6.
Valid values must be a multiple of 0.01 seconds. Defaults to 0.030.
Max RTP ICMP Err—Number of successive ICMP errors allowed when
transmitting RTP packets to the peer before the Cisco IP phone terminates
the call. If the value is set to 0 (the default), the Cisco IP phone ignores the
limit on ICMP errors, disabling the feature.
SIP response status code for the appropriate
4
126

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents