If the power supply voltage falls below the Vreset1 (Typ. = 2.3 V) voltage, this LSI enters low-
voltage detection reset operation. When the voltages input on the ExtU and ExtD pins are used as
the compared voltage, ensure to use the LVDR (reset detection voltage: Typ. = 2.3 V) circuit.
External power
supply voltage
ExtD input voltage
ExtU input voltage
LVDDE
LVDDF
LVDUE
LVDUF
Figure 17.6 Operational Timing of LVDI Circuit (When Compared Voltage is Input
Rev. 1.00, 11/03, page 276 of 376
Downloaded from
Elcodis.com
electronic components distributor
(1)
(2)
IRQ0 interrupt
generated
through ExtU and ExtD Pins))
(3)
IRQ0 interrupt
generated
Vexd
(4)
V
reset1
V
SS