Table of Contents
Advertisement
Table 7.2
Continuously transmits data H'00
at specified bit rate.
Transmits data H'55 when data H'00
is received error-free.
H'AA reception
Transmits number of bytes (N) of
programming control program to be
transferred as 2-byte data
(low-order byte following high-order
byte)
Transmits 1-byte of programming
control program (repeated for N times)
H'AA reception
Downloaded from
Elcodis.com
electronic components distributor
Boot Mode Operation
Host Operation
Processing Contents
Boot program
erase error
Communication Contents
H'00, H'00 . . . H'00
H'00
H'55
H'FF
H'AA
Upper bytes, lower bytes
Echoback
H'XX
Echoback
H'AA
LSI Operation
Processing Contents
Branches to boot program at reset-start.
Boot program initiation
• Measures low-level period of receive data
H'00.
• Calculates bit rate and sets BRR in SCI3.
• Transmits data H'00 to host as adjustment
end indication.
H'55 reception.
Checks flash memory data, erases all flash
memory blocks in case of written data
existing, and transmits data H'AA to host.
(If erase could not be done, transmits data
H'FF to host and aborts operation.)
Echobacks the 2-byte data
received to host.
Echobacks received data to host and also
transfers it to RAM.
(repeated for N times)
Transmits data H'AA to host.
Branches to programming control program
transferred to on-chip RAM and starts
execution.
Rev. 1.00, 11/03, page 101 of 376
Advertisement
Table of Contents
