Renesas H8/36912 Series User Manual page 221

Bit Bit Name
2 TEIE
1 CKE1
0 CKE0
Downloaded from Elcodis.com electronic components distributor
Initial
Value R/W Description
0 R/W Transmit End Interrupt Enable
When this bit is set to 1, TEI interrupt request is enabled.
0 R/W Clock Enable 0 and 1
0 R/W Selects the clock source.
•
00: On-chip baud rate generator
01: On-chip baud rate generator
10: External clock
11:Reserved
•
00: On-chip clock (SCK3 pin functions as clock output)
01:Reserved
10: External clock (SCK3 pin functions as clock input)
11:Reserved
Asynchronous mode
Outputs a clock of the same frequency as the bit rate
from the SCK3 pin.
Inputs a clock with a frequency 16 times the bit rate
from the SCK3 pin.
Clocked synchronous mode
Rev. 1.00, 11/03, page 193 of 376