This LSI includes a successive approximation type 10-bit A/D converter that allows up to four
analog input channels to be selected. The block diagram of the A/D converter is shown in figure
16.1.
16.1
Features
• 10-bit resolution
• Four input channels
• Conversion time: At least 7 µs per channel (at 10 MHz operation)
• Two operating modes
Single mode: Single-channel A/D conversion
Scan mode: Continuous A/D conversion on 1 to 4 channels
• Four data registers
Conversion results are held in a 16-bit data register for each channel
• Sample and hold function
• Two conversion start methods
Software
External trigger signal
• Interrupt request
An A/D conversion end interrupt request (ADI) can be generated
ADCMS32A_000020020200
Downloaded from
Elcodis.com
electronic components distributor
Section 16 A/D Converter
Rev. 1.00, 11/03, page 255 of 376