18.2
When Not Using Internal Power Supply Step-Down Circuit
When the internal power supply step-down circuit is not used, connect the external power supply
to the V
pin and V
CL
directly to the internal power supply. The permissible range for the power supply voltage is 3.0 V
to 3.6 V. Operation cannot be guaranteed if a voltage outside this range (less than 3.0 V or more
than 3.6 V) is input.
Figure 18.2 Power Supply Connection when Internal Step-Down Circuit is Not Used
Rev. 1.00, 11/03, page 280 of 376
Downloaded from
Elcodis.com
electronic components distributor
pin, as shown in figure 18.2. The external power supply is then input
CC
Step-down circuit
Internal
Internal
power
logic
supply
V
V
= 3.0 to 3.6 V
CC
CC
V
CL
V
SS