Watchdog Timer Characteristics; Table 20.7 Watchdog Timer Characteristics - Renesas H8/36912 Series User Manual

Item
Conversion time (single
mode)
Nonlinearity error
Offset error
Full-scale error
Quantization error
Absolute accuracy
Notes: 1. Set AV
2. AI
3. AI
converter is idle.
20.2.5

Watchdog Timer Characteristics

Table 20.7 Watchdog Timer Characteristics

V = 3.0 V to 5.5 V, V
CC
Item Symbol
Internal t
oscillator
overflow
time
Note: * Shows the time to count from 0 to 255, at which point an internal reset is generated,
when the internal oscillator is selected.
Downloaded from Elcodis.com electronic components distributor
Applicable
Symbol
Pins
= V when the A/D converter is not used.
CC CC
is the current in active and sleep modes while the A/D converter is idle.
STOP1
is the current at reset and in standby and subsleep modes while the A/D
STOP2
= 0.0 V, T
SS
Applicable
Pins
OVF
Test
Condition
AV = 4.0 V
CC
to 5.5 V
= –20°C to +75°C, unless otherwise specified.
a
Test
Min.
Condition
0.2
Values
Min. Typ. Max.
134 — —
— — ±3.5
— — ±3.5
— — ±3.5
— — ±0.5
— — ±4.0
Values
Typ. Max. Unit
0.4 — s
Rev. 1.00, 11/03, page 303 of 376
Unit Notes
t
cyc
LSB
LSB
LSB
LSB
LSB
Notes
*