Siemens SINUMERIK 828D Commissioning Manual page 1119

Figure 8-2
File overview
The following files are required:
● custom.com
● easyscreen.ini
Programming
Content of the custom.com file:
Note
The graphic file mcp.png integrated in the example is also only a sample file. If you wish to
use this programming example in your application, you must replace the graphic by one of
your own graphics.
//S(Start)
HS7=("Start example", se1, ac7)
PRESS(HS7)
LM("Maske4")
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
Example with bitmap and text fields
8.4 Programming example for the "Custom" area
"Custom" operating area
189