4. Electrical connections
WARNING
Power supply must be turned off before performing any electrical
connection!
Never force manually the rotation of the shaft not to cause
permanent damages!
For any information on the mechanical and electrical characteristics
of the encoder please refer to the technical catalogue.
Figure 1 - Connectors and diagnostic LEDs
4.1 PWR Power supply connector (Fig.1)
M12 4-pin male connector with A coding is used for power supply.
Description
+10VDC
+30VDC
n.c.
0VDC
n.c.
AMT58x-PN ProfiNET®
Pin
1
2
3
4
7