Figure 79 - Encoder Specific Profile Parameters; Figure 80 - Encoder Specific Profile Parameters - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
Figure 79 - Encoder Specific Profile Parameters page 1
Please note in this page the manufacturer ID in the second line and
the software version in the fourth line (102 = 1.0.2, see on page 160).
For further information on the parameters shown in this page refer to
the sections "9.2 Index 0xB02E: supported PROFIdrive specific
parameters" and "9.3 Index 0xB02E : supported encoder specific
parameters".
Figure 80 - Encoder Specific Profile Parameters page 2
116