AMT58x-PN ProfiNET®
Install the device following strictly the information in the section 3
"Mechanical installation;
mechanical installation has to be carried out with stationary
mechanical parts;
do not disassemble the unit;
do not tool the unit or its shaft;
delicate electronic equipment: handle with care; do not subject
the device and the shaft to knocks or shocks;
respect the environmental characteristics of the product;
unit with solid shaft: in order to guarantee maximum reliability
over time of mechanical parts, we recommend a flexible
coupling to be installed to connect the encoder and user's shaft;
make sure the misalignment tolerances of the flexible coupling
are respected;
unit with hollow shaft: the encoder can be mounted directly on a
shaft
whose
characteristics specified in the purchase order and clamped by
means of the collar and, when requested, the anti-rotation pin.
2
Mechanical safety
diameter
has
to
respect
the
technical