Figure 9 - Assigning The Device Name - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®
Mode 1
Enter the Properties dialog box by double clicking the encoder icon in
the HW Config window and set the device name in the Device name
field. Check that the Assign IP address via IO controller check box is
selected if you want the IP address being assigned by the IO
controller; otherwise deselect it if you want it to be uploaded from the
internal memory of the IO device.

Figure 9 - Assigning the device name

NOTE
The device name default setting is the name from the GSD file. With
integral Profinet interfaces, the device name is derived from the short
description. If several devices of the same type are arranged in the
same Profinet IO system, Step 7 automatically supplements the
name from the GSD file with a serial number. The second device is
assigned the extension "-1", the third device the extension "-2", etc.
19