Figure 72 - Opening The Web Server; Integrated Web Server - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®

15. Integrated web server

Profinet encoders from Datalogic Automation integrate a web server.
This web-based user interface is designed to deliver helpful
information on the device that can be accessed through the Internet.
In particular it makes monitoring and advanced maintenance of the
encoder from every PC and even smart phones or tablet devices
running a web browser possible. Since its only requirement is a
HTTP(S) connection between the web browser and the web server
running on the device, it is perfectly fitted also for remote access
scenarios.
Before opening the Profinet encoder web server please ascertain
that the following requirements are fully satisfied:
 the encoder is connected to the network;
 the encoder has valid device name and IP address;
 the PC is connected to the network;

a web browser (Internet Explorer, Firefox, Chrome, Safari,
Opera, ...) is installed in the PC or device used for connection.
To open the Profinet encoder web server proceed as follows:
1. type the IP address of the encoder you want to connect to in
the address bar of your web browser and confirm;

Figure 72 - Opening the web server

112