AMT58x-PN ProfiNET®
The Properties – Parameter Access Point property sheet will appear.
Enter the Parameters tabbed page to display the complete list of the
parameters available for the Profinet encoder.
The encoder specific parameters implemented by the manufacturer
are shown in the table. The parameters data is transferred to the
encoder using 0xBF00 data record at each system boot up.
To set the parameter data, select the value in the drop-down list next
to each parameter in the column Value.
For detailed information on the implemented parameters, please
refer to the section "9.4 Index 0xBF00 : user parameter data" on
page 64.
Figure 25 - Parameter Access Point properties
After having changed any parameter values, you need to download
data to the PLC pressing the Download button in the Toolbar.
Figure 26 - Downloading data to the PLC
31