Checking The Device Name; Figure 17 - Verifying Device Name; Figure 18 - Verifying Device Name - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®

5.3.6 Checking the device name

After completing the operation, we recommend the Device Name to
be checked. To do this press PLC, Ethernet and then Verify Device
Name... command in the menu bar of the HW Config window.

Figure 17 - Verifying device name

In the Verify Device Name dialog box, check that the encoder is
listed properly with correct Device name and status.

Figure 18 - Verifying device name

26