Table of Contents
Advertisement
Preliminary information
This guide is designed to provide the most complete information the operator needs to
correctly and safely install and operate the following encoders fitted with Profinet interface:
AMT58...PN (DAP 1 : multiturn encoder 13 +14 bits)
To make it easier to read the text, this guide can be divided into some main sections.
In the first section (from chapter 1 to chapter 4) general information concerning the safety,
the mechanical installation and the electrical connection.
In the second section (chapter 5) information on how to install and configure the encoder
in the STEP 7 development environment as well as tips for setting up and running properly
and efficiently the unit are provided.
In the third section (from chapter 6 to chapter 12) both general and specific information is
given on the Profinet interface.
In this section the interface features and the parameters implemented in the unit are fully
described.
In the last section (from chapter 13 to chapter 15) some examples of programming and
advanced maintenance information are explained.
Advertisement
Table of Contents
